Basic Operations; Turning On The Power - JVC KD-LH1150 Manual De Instrucciones

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 10 – 14.
To play a CD,
see pages 15 – 19.
To operate the CD changer,
see pages 33 – 39.
To operate the external component
(LINE IN), see page 40.
3
Adjust the volume.
Current sound mode (iEQ)
(see page 21)
3
To increase the volume
To decrease the volume
Volume level appears.

BASIC OPERATIONS

4
Adjust the sound as you want. (See
pages 20 – 22.)
Note:
While playing a source, you can also show the level
meter on the display. For details, see "Activating the
level meter" on page 23.
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
second.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
NOTICE:
The illustrations of the display used in this manual
are mainly of the initial setting when shipped from
the factory. If you have changed the display
patterns or some PSM items, the actual displays
you see will be different.
2
for more than one
7