Fagor LF-020 SX Manual De Instalacion Y Uso página 54

4
LEVELLING AND POSITIONING
LEVELLING
It is important for the dishwasher to rest firmly on the floor, in a perfectly upright position. It should
then be levelled to rectify the effect of any unevenness of the floor.
Use a spirit level.
POSITIONING
If the appliance is to be positioned under a worktop, top can be removed or left in position.
a If you wish to remove
the cover, you may do
this by detaching the
rear part of the same.
b
Remove the rear
counterweight and pull
out the insulating
blanket, if the model
has one.
c
Then pull the support
blocks for the cover
outwards and
backwards.
Fitting a dishwasher into
a row of cupboards.
When fitting the
dishwasher into a row of
kitchen cupboards with a
continuos plinth:
Unscrew and remove
a
the base.
b Loosen and remove su-
pport legs.
c Screw the adjustable
legs into the dishwasher.
d
Refit the base to the
cupboards and, if
necessary, make any
haight adjustment to
plinth to the required
height to allow the
dishwasher to fit properly
behind.
a
c
a
c
b
Fit the dishwasher into the
space. Adjust it to the
worktop until the top part of
the dishwasher is touching
the lower part of the cabinet
worktop.
b
d