Dishware Chipped - Haier HDP18PA Manual Del Usuario

HDP18PA-MANUAL 4/9/02
English

Dishware chipped:

• This is due to poor loading or overloading. You need to be careful when loading.
Do not overload. You need to place glassware securely against pins. Make sure
delicate items are on the side rack. We recommend that fine chinaware or crystal
items should be hand washed.
Noise:
Some of the sounds you will hear are normal.
• You will hear sound of the water fill and rinse.
• You will hear drain valve opening to pump water out.
• You will hear motor stopping at the end of the cycle.
• If some utensils are not secure in the rack, you will hear that they are being tossed
around the tub.
Oversudsing:
This is due to use of regular hand washing detergent.
You may need to check if the detergent is for "Automatic Dishwasher Use". If not
then you need to use the proper detergent that is for dishwasher.
Dishware has an odor:
• This is due to incomplete cycle.
You need to allow cycle to be fully completed.
• New scented detergent used.
This is normal because different types of detergents may have different frgrances.
Etching:
• Too much detergent used.
Use the appropriate amount of detergent. Reduce amount of detergent
used per load.
• The water temperature is too hot.
You need to lower water temperature.
23
4:22 PM Page 25