D Isplaying And Setting The Clock - Pioneer DEH-P900HDD Manual De Operación

D
isplaying and setting the clock
You can turn the time display on or off and set
the time.
Setting the time display on or off
1. Press NEXT to display "CLK".
Press NEXT until "CLK" appears.
2. Press CLK and then press ON/OFF to
turn the time display on.
The light illuminates. When the time display
is turned on, "TIME", "DATE" and "JUST"
appear simultaneously.
• Press ON/OFF again to turn the time dis-
play off.
• If you press BAND and exit the calendar
and time mode, the time display will
appear instead of the source name.
Time display
Note:
• If you do not operate the function within about 60
seconds, the display is automatically returned.
Off clock display
When the time display is turned on, the calen-
dar display appears with the time display when
sources and the feature demo are off.
Setting the date
The calender display adjusted in this mode
appears only when sources and the feature
demo are off.
1. Press NEXT to display "CLK".
Press NEXT until "CLK" appears.
2. Press CLK and then press DATE to set
the date.
3. Press 2 2 or 3 3 to switch between day,
month and year.
4. Press 5 5 or ∞ ∞ to correct the date.
Pressing 5 advances the day, month or
year.
Pressing ∞ turns back the day, month or
year.
Setting the time
1. Press NEXT to display "CLK".
Press NEXT until "CLK" appears.
2. Press CLK and then press TIME to set the
time.
3. Press 2 2 or 3 3 to switch between hour and
minute.
4. Press 5 5 or ∞ ∞ to adjust the time.
Pressing 5 advances the hour or minute.
Pressing ∞ turns back the hour or minute.
Matching the time to a time signal
1. Press NEXT to display "CLK".
Press NEXT until "CLK" appears.
2. Press CLK and then press JUST to match
the time to a time signal.
• If the minute is "00" – "29", the minutes are
rounded down. (e.g., "10:18" becomes
"10:00".)
• If the minute is "30" – "59", the minutes are
rounded up. (e.g., "10:36" becomes
"11:00".)
Note:
• During date adjustment, "JUST" is not displayed.
10