R Esetting The Microprocessor - Pioneer DEH-P900HDD Manual De Operación

A
bout this manual
This product features a number of sophisticated
functions ensuring superior reception and oper-
ation. All are designed for the easiest possible
use, but many are not self-explanatory. This
operation manual is intended to help you bene-
fit fully from their potential and to maximize your
listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you use this
product. It is especially important that you read
and observe the "Precaution" on this page and
in other sections.
This manual explains head unit operation. You
can perform the same operations with the
remote controller.
P
recaution
CAUTION: USE OF CONTROL OR
ADJUSTMENT OR PERFOR-
MANCE OF PROCEDURES
OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION
EXPOSURE.
CAUTION: THE USE OF OPTICAL INSTRU-
MENTS WITH THIS PRODUCT
WILL INCREASE EYE HAZARD.
• Keep this manual handy as a reference for
operating procedures and precautions.
• Always keep the volume low enough for outside
sounds to be audible.
• Protect the product from moisture.
• If the battery is disconnected, the preset memo-
ry will be erased and must be reprogrammed.
• Should this product fail to operate properly, con-
tact your dealer or nearest authorized Pioneer
Service Station.
• When having this product serviced or repaired,
data you have recorded may be lost. Because
of the specifications of this product, there can
be no compensation for the contents of the
recorded data. Please be aware of this before-
hand.
• There can be no compensation for recorded
data damaged or lost because of troubles or
defects of this product. (At present, there is no
correspondence to backup or repair of music
data.)
• This product does not support additional hard
disk installation or hard disk exchange by the
customer.
R
esetting the microprocessor
The microprocessor must be reset under the
following conditions:
When using this product for the first time after
installation.
When the machine fails to operate properly.
When strange (incorrect) messages appear on
the display.
• To reset the microprocessor, press
RESET on the head unit with a pen tip or
other pointed instrument.
Precaution:
• After resetting, please set the time and date (see
page 10). If the time and date are not set correctly,
the music server and the "Memory Stick" may not
operate correctly.
Note:
• The recorded contents of the music server are
erased when the RESET button is pressed.
6