Pioneer DEH-P900HDD Manual De Operación página 48

TV Tuner
The following explains how to use this product
to control a TV tuner, which is sold separately.
For details of TV tuner-specific operation/fea-
tures, see your TV tuner's manual.
• With this product, you can operate preset chan-
nel list as one additional function.
D
isplay and indicators
FORM 1
q
FORM 2
q
qBand
wPreset number
eChannel
47
w
e
w
e
B
asic operation
1. Press SOURCE to select the TV tuner.
Press SOURCE until "Television" appears.
2. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends for-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
3. Turn VOLUME to adjust the volume.
4. Press 2 2 or 3 3 to tune in to a station.
• If you press and hold 2 or 3 for about one
second and then release, you can perform
seek tuning.
S
toring and recalling broadcast
stations
If you press any of the buttons 1 – 6 (or 7 – 12),
you can easily store up to 12 broadcast stations
for later recall.
Storing broadcast stations
1. Press NEXT to display "1" – "6" (or "7" –
"12").
Press NEXT until "1" – "6" (or "7" – "12")
appears.
2. When you find a station that you want to
store in memory, press and hold any of
the buttons 1 – 6 (or 7 – 12) until the pre-
set number stops flashing.
The station is stored in memory under the
selected button.
Note:
• Up to 12 stations can be memorized in one band.
• This product allows you to store and recall directly
using preset channels 7 –12.