"Memory Stick" Player
D
isplay and indicators
FORM 1
q
r
FORM 2
q
r y
qSource name
wBit rate indicator
eTrack number
rTrack title
tPlay time
yTrack artist name
B
asic operation
The "Memory Stick" player plays one
"MagicGate Memory Stick (MG Memory Stick)"
at a time. (See page 67.)
1. Press OPEN to open the front panel.
2. Insert a "Memory Stick" into the MS load-
ing slot until it clicks into position.
MS loading slot
Access lamp
3. Close the front panel.
37
w
e
t
e
t
MS EJECT button
4. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
5. Turn VOLUME to adjust the volume.
6. Press 2 2 or 3 3 to select a track.
Pressing 3 skips to the start of the next
track.
Pressing 2 once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold 2 or 3, you can per-
form fast forward or reverse.
7. Press OPEN and then press MS EJECT to
eject the "Memory Stick".
• The access lamp lights while data are
being written. Never remove the "Memory
Stick" while the access lamp is lit, as other-
wise data may be destroyed.
• Be sure to close the front panel after
removing the "Memory Stick".
WARNING:
• Do not use with the front panel left open. If the
front panel is left open, it may result in injury
in the event of an accident.
Note:
• You can select "Memory Stick" as the source by
pressing SOURCE when a "Memory Stick" is loaded
in this product.
• When the front panel is open, multi-function but-
tons are not available.
• Do not insert anything other than a "Memory Stick"
into the MS loading slot.
• A "Memory Stick" left partially inserted after ejec-
tion may incur damage or fall out.
• If the "Memory Stick" player cannot operate proper-
ly, an error message (such as "ERROR-30")
appears on the display. Refer to "Understanding
"Memory Stick" player error messages" on page 71.
• During playback of music data with a limited num-
ber of playbacks, fast forward and reverse are not
possible, so that the number of playbacks can be
managed correctly.
• When TA interruption occurs during playback of
music data with a limited number of playbacks, the
number of playbacks is decreased by one. This can
be prevented by setting TA interruption to OFF in
advance.