"Memory Stick" Player
S
canning tracks of a "Memory
Stick"
Scan play lets you hear the first 10 seconds of
each track on the "Memory Stick".
1. Press FUNC and then press SCAN to
select the scan mode.
2. Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track are played.
• When the scan mode is exited while scan
play is on, "SCAN" appears on the basic
display.
3. When you find the desired track, press
SCAN to turn scan play off.
The light goes off. The track will continue to
play.
• If the scan mode is automatically canceled,
select the scan mode again.
Note:
• After scanning of a "Memory Stick" is finished, nor-
mal playback of the tracks will begin again.
S
electing tracks from the track
title list
The track title list lets you see the list of track
titles on a "Memory Stick" and select one of
them for playback.
1. Press FUNC and then press T.LIST to
select the track title list mode.
39
2. Press NEXT to display the desired track
title.
Press NEXT until the desired track title
appears.
3. Press the corresponding number button
to select the desired track title.
That selection will begin to play.
Note:
• You can also use 2, 3 and 5 to select and play
the desired track title.
P
ausing "Memory Stick" play-
back
Pause lets you temporarily stop playback of the
"Memory Stick".
1. Press FUNC and then press PAUSE to
select the pause mode.
2. Press PAUSE to turn the pause on.
The light illuminates. Play of the current
track pauses.
• Press PAUSE again to turn the pause off.
• When the pause mode is exited while
pause is on, "PAUSE" is displayed in the
basic display.
Note:
• You can also turn pause on or off by pressing
PAUSE in the following display.