Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A
udio menu
The audio menu has the following functions:
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
(When you select the 13-band graphic equalizer
mode (EQ2) or the time alignment adjustment mode
(T.AL2), the display is not returned automatically.)
• "T.AL2" is displayed only when you select "FL" or
"FR" in the position selector mode (POSI).
• "SW2" is displayed only when the subwoofer output
is on in the subwoofer output mode (SW1).
• "SLA" is not displayed when you select FM tuner as
the source.
• "A.EQ" is displayed after the auto-equalizer curve
has been set.
U
sing balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1. Press AUDIO to select the fader/balance
mode.
2. Press 5 5 or ∞ ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the
rear.
• "FADER F25" – "FADER R25" is displayed
as the front/rear speaker balance moves
from front to rear.
• "FADER FR00" is the proper setting when
only two speakers are used.
3. Press 2 2 or 3 3 to adjust left/right speaker
balance.
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.
• "BALANCE L25" – "BALANCE R25" is dis-
played as the left/right speaker balance
moves from left to right.
U
sing loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1. Press AUDIO and then press LOUD to
select the loudness mode.
2. Press LOUD to turn the loudness on.
"LOUDNESS ON" appears in the display.
• Press LOUD again to turn loudness off.
U
sing sound field control,
octaver and BBE
SFC (sound field control) incorporates four pro-
grams reproducing the typical sound field of a
studio, club, concert hall or dome. This function
makes it possible to reproduce the realistic
sound fields of the four programs in your car.
Octaver makes the bass sound louder.
Playback very close to the original sound can
be obtained by correction with a combination of
phase compensation and high-range boost for
the delay of the high-frequency components
and the amplitude deviation occurring during
playback. This function makes it possible to
reproduce the dynamic sound field as if you are
listening to a live performance.
Note:
• Manufactured under license from BBE Sound, Inc.
The mark BBE is a trademark of BBE Sound, Inc.
R
sound
50
Publicidad
Tabla de contenido
