Audio Adjustments; A Djusting The Audio Easily; R Ecalling Equalizer Curves; A Djusting The Audio Finely - Pioneer DEH-P900HDD Manual De Operación

Reproductor hdd/cd de alta potencia con “memory stick” y sintonizador fm/am
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Audio Adjustments

A
djusting the audio easily
The following functions let you easily adjust
your audio system to match the car interior
acoustic characteristics which vary depending
on the type of car.
• Recalling equalizer curves (EEQ)
• Using position selector (POSI)
• Using time alignment (T.AL1)
• Adjusting equalizer curves (EQ1)
A
djusting the audio finely
By carrying out the following settings/adjust-
ments in order, you can create a finely-tuned
sound field effortlessly.
• Using position selector (POSI)
• Using time alignment (T.AL1)
• Adjusting time alignment (T.AL2)
• Using subwoofer output (SW1)
• Adjusting subwoofer settings (SW2)
• Setting the high pass filter for front speakers
(HPF F)
• Setting the high pass filter for rear speakers
(HPF R)
• Using balance adjustment (F/B)
• Creating the auto-equalizer curve (A.EQ)
• Recalling equalizer curves (EEQ)
• Adjusting equalizer curves (EQ1)
• Adjusting 13-band graphic equalizer (EQ2)
E
xtra functions
These functions are helpful in adjusting the
sound to suit your system or your personal pref-
erences.
• Using loudness (LOUD)
• Using sound field control, octaver and BBE
sound (SFC)
• Using automatic sound levelizer (ASL)
• Adjusting source levels (SLA)
• Switching the digital attenuator (D.ATT)
49
R
ecalling equalizer curves
The graphic equalizer lets you adjust equaliza-
tion to match the car interior acoustic character-
istics as desired. There are seven stored equal-
izer curves which you can easily recall at any
time.
1. Press EEQ to switch to the easy equalizer
mode.
2. Press NEXT to switch between "CSTM2"
and the other selections (curves).
3. Press the corresponding button to select
the desired equalizer curve.
Button
Equalizer curve
S.BASS
Super bass
PWRFL
Powerful
NATRL
Natural
VOCAL
Vocal
FLAT
Flat
CSTM1
Custom1
CSTM2
Custom2
• "CUSTOM1" and "CUSTOM2" are adjusted
equalizer curves that you can create for
yourself. (Refer to "Adjusting 13-band
graphic equalizer" on page 51.)
• When "FLAT" is selected the equalizer
makes no supplement or correction to the
sound. This is useful for checking the
effect of the equalizer curves by switching
alternatively between "FLAT" and a set
equalizer curve.
Note:
• You can also use 2 and 3 to select the desired
equalizer curve.
• If you do not operate the function within about eight
seconds, the display is automatically returned.

Publicidad

Tabla de contenido
loading

Tabla de contenido