Switching Off - Stihl RMA 370 Manual De Instrucciones

English

Switching Off

1
To switch off the motor, release the
N
switch lever (1) – the cutting blade
comes to a standstill after coasting
for a few seconds.
Always remove the battery and fuse key
from the power tool during work breaks
and after finishing work.
20
Coasting Brake
1
2
The coasting brake brings the cutting
blade to a standstill in less than 3
seconds after the switch lever is
released.
1 Coasting brake disengaged.
2 Coasting brake stops the rotating
cutting blade.
Removing the Battery
Opening the Battery Compartment
Press in the tab (1) and swing the
N
cover (2) to the rear.
Removing the Battery
3
Pull the battery (3) out vertically.
N
Removing the Fuse Key
4
5
Pull the fuse key (4) out of the
N
socket (5).
2
1
RMA 370