Use Buckle; Use Shoulder & Waist Harnesses; Adjust Calf Support; Use Front Swivel Lock - Joie infanti brisk Manual De Instrucciones

Use Buckle

Release Buckle
Press the center button to release the buckle. 11
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A click sound means the buckle is locked completely.
! To avoid serious injury from falling or sliding out, always secure your child with harness.
! Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
! Do not cross the shoulder belts. This will cause pressure on child's neck.
Use Shoulder & Waist Harnesses
! In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
13
Shoulder harness anchor A
13 - 2
Shoulder harness anchor B
- 3
13 Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
Use either shoulder harness anchor in the slots that are closest to child's shoulder height.
Use slide adjuster to change the harness length.
15 - 2
Press the button , while pulling the waist harness to proper length

Adjust Calf Support

The calf support has 3 positions.
Raise Calf Support
To raise the calf support, just push it upwards.
Lower Calf Support
Press the adjustment buttons on both sides of the calf support
- 2
16

Use Front Swivel Lock

Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel locks on uneven surfaces.
11
- 1
12 , and click into the center buckle. 12
- 3
12
14
- 1
15
15 - 3
.
- 1
16
, and rotate the calf support downwards.
17

Use Brake

To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
The brake must be engaged when placing and removing children.
Tip Always apply brake when stroller is in stopped position. To ensure brake is fully engaged, gently rock
- 2
the stroller backwards and forwards before releasing the handle.

Use Hood

To open the hood, pull hood forwards and press stretchers down on both sides.
To fold the hood, pull up the stretchers on both sides

Fold Stroller

Press the folding button
- 3
20 . Lock the stroller by tucking storage latch onto the storage mount
locked completely.

Use Carry Strap

You can carry the stroller with ease by lifting the carry strap.

Use Raincover

To assemble the rain cover
fasteners and 6 pairs of snaps on the rain cover.
! When using the rain cover, please always check its ventilation.
! When not in use, please check the rain cover has been cleaned and dried before folding.
! Do not fold the stroller after assembling the rain cover.
! Do not place your child into the stroller assembled with rain cover during hot weather.

Use Footmuff

The soft footmuff can provide your child with a warm and comfortable environment.
Assemble the footmuff by following these steps.
1. Place the footmuff over the seat after unziping it, thread the shoulder harnesses, waist harnesses and
crotch harness through respective slots.
2. Stick the hook and loop fasteners.
3. Place baby into the footmuff, lock the safety buckle, and then rezip the footmuff. The assembled
footmuff is shown as
!
manual.
18
- 1
19
- 1
20 and rotate the folding handle upwards
21
23 , place it over the stroller, and then attach the 10 pairs of hook and loop
24
26
27
28
.
For the using method for restraint system, please refer to the relevant section in the instruction
19
and pull hood toward back.
- 2
20 , push the stroller forward to fold
- 1
21 , then the stroller is folded and
22
25
12