Recalling The Memory Data - AND 767F PRO Manual De Instrucciones

Recalling the Memory Data

Note: This device stores the last 60 measurements for each of the four user in memory.
1. Press the or button.
The average of all measurements and the number of data are
displayed. (If no data, "0" is displayed. Press the ,
to turn the device off.)
2. Each time the button (or the
reverse order) is pressed, the memory data is displayed as follows.
Most recent data (No.n, in the example, No.35)
Three seconds after the data number display, the measurement data
is displayed.
Last data (No.1)
Three seconds after the data number display, the measurement data
is displayed.
3. After the last data is displayed, press the
average display of all measurements.
4. Press the SET button to display the memory display after changing the
user number.
5. Press the START button to turn the device off. After one minute of
non-operation, the device will turn off automatically.
or START button
button to display the data in the
button to return the
Average systolic
Average diastolic
Average pulse
Average of
all the data
Most recent data
Last data (Oldest)
User 1
User 2
User 3
User 4
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse
E-13