Recalling Memory Data; Clearing The Memory Data - AND UA-851 Manual De Instrucciones

Note: This device stores the last ninety measurements in memory. The data are
retained as long as the batteries are in the device. When you remove the
batteries or the batteries are drained, the data will be erased.
1. Press and hold the START button until the
average of all the data stored in memory is
displayed. Release the START button.
2. Then, the data number of the most recent
measurement and the data are displayed.
Automatically the older data are displayed
in turn.
3. After the last data are displayed, the power is
turned off automatically.
Note: Pressing the START button during the recalling operation will turn the
power off.
To cancel the recalling operation and enter the measurement mode,
press and hold the START button.

Clearing the memory data

The stored data are cleared when the batteries are removed or drained.

Recalling Memory Data

English 11
Press and hold
START
Averaged systolic
Averaged diastolic
Number of data
Release the button
Data number of
the most recent data
Systolic pressure
Diastolic pressure
Pulse rate
of
the most recent data