Waste Management - GYS GYSCAP 680 E Manual De Instrucciones

Connecting the booster:
• Class III (booster)
• This charger is fuse protected
Maintenance:
• The device is maintenance-free.
• If the internal fuse is melted, it must be replaced by the manufacturer
(GYS' dedicated sales service) or by an equally qualified person to
prevent any accidents.
• Remove the casing on a regular basis, to remove any excess dust.
Take this opportunity to have the electrical connections checked by a
qualified person, with an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic Community).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
website (see cover page).

Waste management:

• This product should be disposed of at an appropriate recycling
• The product's manufacturer contributes to the recycling of its pac-
• This product should be recycled appropriately
GENERAL DESCRIPTION
Intended for vehicles equipped with a 12V battery, this self-contained starter is equipped with supercapacitors and uses
the battery voltage of a running vehicle to recharge and start the engine within seconds of a failed vehicle.
The GYSCAP 680E operates with five high-performance supercapacitors for a total capacity of 680 Farads.
GYSCAP 680E STATE OF CHARGE
Press the Power button.
The status of the internal capacity of the GYSCAP 680E is displayed.
10
facility. Do not throw away in a domestic bin.
kaging by contributing to a global recycling system.
GYSCAP 680E EN