Kettler ST2701-68 Funciones Y Manejo De La Computadora De Entrenamiento página 8

Computer and training instructions
GB
Operating instructions for the training computer with digital display
(ST2701-8) / (ST2703-8) / (ST2705-8)
1 2 3 4
11 12
8
5 6 7 8 9
13 14 15 16
Features
Symbols:
1. P
2. SCAN
3. ODOMETER
4. RPM
5. SPEED
6. TIME
7. DISTANCE
8. KILOJOULE
9. PULSE
15. Heart
Values:
10. Large display
11. Pedal rotations
Step frequency
12. Time
13. Distance
Speed
14. Energy
consumption
16. Pulse
Buttons:
Minus button
Set button
Plus button
10
Recovery button
Connections (at front)
Jack (4 poles)
Connections (at rear)
Jack (4 poles)
Jack (2 poles)
Battery compartment
1.0 Displays before starting the training
1. Room temperature
2. Complete display
3. Total kilometres covered fig. 3 [display term:10 seconds or but-
4.
no training: ready to accept set values
automatic change of display
display of total kilometres covered
display of pedal rotations / step fre-
quency
display of speed
display of training time
display of training distance
display of energy consumption
display of current pulse
will flash in accordance with pulse
room temperature [0 – 40 °]
odometer [0 – 9999 km]
fitness value [F1.0 – F6.0]
20 – 199 [Rotations/min]
0:00 – 99:59 [min:sec]
0.0 – 99.9 [km]
0.0 – 99.9 [km/h]
0 – 9999 [KJ]
50 – 199 [Beats/min]
reduce values (Count down display
range)
function button [Set value, change, re-
set of display]
increase values (Display range for-
ward)
function button [Fitness value determi-
nation]
for the ear clip
for the hand pulse sensors
for the speed pickup
2 batteries: Mignon1,5 Volt, LR6, AA,
fig. 1 [prior to and after training]
fig. 2 [after pedal rotation or pressing
a button, 1 sec]
ton]
fig. 4 readiness for training