Operations Description; How To Weight A Product; Use Of The "Tare" Key - Baxtran MS Manual De Usuario

User's Guide
6. OPERATION'S DESCRIPTION

6.1. HOW TO WEIGHT A PRODUCT

Turn your scale on pressing the
countdown sequence starts in the general view finder. At the end
of this countdown sequence, the view finder will be in "zeros". At
this moment the scale is ready to weight.
Then place the product to weight on the plate and you will see the
weight in the aphanumeric indicator. the "kg", "lb" or "oz" symbol
will appear in the indicator. for example, if you place a product
whose weight is 2.5 kg, you will see the following:
6.2. HOW TO USE THE "TARE"
When you wish to weight a product in a container and you do not want to consider the container's weight during
the operation, you can use the "TARE" function. To use this function, follow these steps: suppose you are going
to weight 5 kg of some product in a container that weight 4.5 kg.
1. Place the empty container on the scale.
2. Press the
display:
3. Put the product inside the container and the scale shows only
the weight of the product without the container's weight. Notice
that when you remove the container a negative number (weight of
container) appears in the general view finder.
It is important to mention that this function is subtractive. For example: if we have a containerthat weight 2 kg,
the scale will only be able to weight up to 3 kg of product to complete the maximum capacity (30 kilograms,
66'14 pounds or 1058'22 ounces in a MS30 model). To canel the tare function just press the
the scale will return to the ormal function. The NET symbol will disappear.
The two following observations are specially important:
A. When there is no weight on the scale (container) you can not
activate the "TARE" function.
B. When a container is tared, but when you remove it from the
plate and you remove a larger weight than the container, (grease,
remaning of a product, etc) or when the plate is slightly lifted with
your hand. "NEG" (negative) will appear.
When this happens:
A. Let go the plate if you are holding it.
B. If the alarm continue, turn off the scaleand turn it on again.
32
key. You will see that a
key. After some seconds the view finder will
Check weight scale Model MS
key and