General View Finder (Lcd Display); Keyboard - Baxtran MS Manual De Usuario

Check weight scale
5.2. GENERAL VIEW FINDER (LCD DISPLAY)
1. ALPHANUMERIC INDICATOR: Shows the product's wight in pounds, kilograms or ounces. When this
happens, the symbol "Ib", "kg" or "oz" appears in indicator. the alphanumeric indicator can show the following
readings:
"kg", "lb" u "oz"
OVERLOAd
NEG.
LOWbAT
HELP
UNLOAd
2. "LOW BATTERY" INDICATOR: Is shown when the energy of the battery is too low. This indicator turns on
to tell us that it is necessary to recharge it.
3. "ZERO" INDICATOR: These references to zero indicate that the scale is ready to start weighting products.
The zero indicator disappear when a load is placed on the scale.
4. "NET" INDICATOR: Indicates that the "TARE" function has been acticated. the readings shown correspond
to the net weight.
5. "AC/CD" POWER SUPPLY INDICATOR: When the AC/DC power supply is connected to the scale this
indicator turns on.

5.3. KEYBOARD

1. KEY: When you press the ON key the scale turns on.
2. KEY: When you press the OFF key the scale turns off.
3. KEY: When you press this key you change the units of the scale from kilograms to pounds, from
pounds to ounces or from ounces to kilograms.
4. KEY: When you press this key start with zeros.
5. KEY: When you press this key you eliminate any container's weight that you do not wish to consi-
der during a transaction (for example: boxes, bags, bottles, etc).
6. KEY: This key is used to turn on and turn off the backlight.
7. "GENERAL VIEW FINDER": Used to indicate the weight of the product.
Model MS
Is shown when the scale is ready to weight products.
Is shown when there is an overweight on the scale.
Is shown when there is a negative weight.
Is shown when the battery does not have enough energy.
Is shown when you turn on the scale with an excessive weight.
Is shown when the scale is turned on without the plate.
User's Guide
31