Output 1 And Output 2 Tabs - Balluff BTL7-A/C/E/G501 Serie Manual De Instrucciones

BTL7-A/C/E/G501/504/505-... / BTL7-C/E508/509/512/513-...
BTL7 Configuration Tool
3
Windows and tabs (continued)
3.4 Output 1 and Output 2 tabs
(if two outputs are present)
This description applies to both windows, with
the same options available.
3.4.1 Function
You can select a function that will be shown in the curve.
The following functions can be selected:
Position: Position in the measuring range.
Velocity: Velocity of the magnet, with the sign indicating
the direction of motion. Movement from the start point to
end point is output with a positive sign and movement
from the end point to the start point with a negative sign.
Velocity (no sign): Velocity of the magnet, but the
direction of motion cannot be read.
Differential position: Distance between two magnets.
This can only be selected if two magnets are selected
(see "Magnet" tab on page 9).
10 english