Fast Forward - Emerson LD195EM8 7 Manual Del Usuario

[] Playback
Before you begin:
Turn on the amplifier and any other device which is connected to this unit.
Make sure the external audio receiver (not included) are set to the correct
input mode.
1 Press [POWER] to turn on the unit.
2 Insert the disc with label side facing forward.
[] Disc Menu
Somediscs containdiscmenus whichdescribe thecontentsof thediscor
allowyouto customize d iscplayback, o rtitle menuwhichliststhe titles
availableontheDVD.
To display the DVD menu, press [MENU] and use
[Cursor • / • / _1 / I_] to select an item, then press
[ENTER] (or [PLAY I_]).
To display the top menu, press [TOP MENU] and use
[Cursor • / • / _1 / I_] to select an item, then press
[ENTER] (or [PLAY I_]).
I Note:
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
[] Resume Playback
• In case the DVD was recorded on both sides, make
sure the label side you want to play back is
facing forward.
3 The unit switches to the DVD mode when the unit was
in TV mode and detects the type of disc.
e.g.) DVD
Press [PLAY I_] if the unit does not go to the DVD mode.
The disc starts playback.
• If playback does not start automatically, press [PLAY I_]
again.
5 Press [STOP II] to stop playback temporarily.
STOP
• If playback remains stopped for 20 minutes, the unit
will turn itself off automatically when "AUTO POWER
OFF" is set to "ON".
6 Press [EJECT___] to eject the disc.
Press [STOP II] during playback.
Resume message will appear on
the TV screen.
Press [PLAY I_]. Playback will
resume from the point at which
playback was stopped.
Note:
• Tocancel resume, p ress[STOPII] one more time in the stop
mode. Onsome discs,[STOPII] will not work while the resume
messageappears.Pleasewait until the messagedisappears.
• The resume information will be kept even when unit is turned
off. However, ejecting the disc will cancel the resume feature.
Playback will start at the beginning the next time you insert
the disc.
[]Skip_
During playback, press [SKIP _ / IHH] repeatedly to
skip chapters, titles or tracks to a desired point.
Playback will start automatically from the chapter, title
or track you selected.
Note:
•[SKIP _/IHH]
are not available when playback isstopped.
• Chapter/title/track search can only be performed during
playback or when the unit has kept the resumeinformation. It
cannot be performed in the stop mode.
• Chapter/title search is not available with some DVD.
Note:
• "_" may appear at the top-right on the TV I
screen when the operation is prohibited by Q
I
the disc or this unit.
• Some DVD may start playback from title 2
or 3 due to specific programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
• When you cannot remove the disc, you may try either
following operations.
- Press and hold [EJECTS__] on the unit for more than 5 seconds.
- Unplug the ACpower cord and plug it in again, then press
[EJECT ___1.
It will take about 10 seconds to eject the disc, while that the
unit will not respond to any key commands.
[] Fast Forward / Fast Reverse
Press and hold [REV <<] or [FWD IH_]
repeatedly during playback to select the
desired forward or reverse speed.
To continue playback, press [PLAY I_].
Note:
•Set "STILL MODE" to "FIELD" in "OTHERS" menu if pictures in
the fast playback mode are blurred. (Refer to page 42.)
• Fast forward/fast reverse speed varies with disc.
Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x)
on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.
• For DVD, sound will be muted during the search.
• For audio CD, sound will be intermittent during the search.
EN