Safety Regulations - Daikin Modular L Manual De Instalación, Uso Y Mantenimiento

Safety regulations

Skills required for the installation of the machine
Installers must perform operations according to their professional qualifications: all activities not within one's expertise
(i.e. electrical connections) must be carried out by specialised and qualified staff so as not to endanger one's safety and
the safety of the other operators interacting with the machine.
Transport and equipment handling operator: authorised person with recognised expertise in using transport
and lifting equipment.
Technical installer: expert technician, sent or authorized by the manufacturer or its representative, with adequate
skills and training to install the machine.
Assistant: technician subject to care obligations while lifting and assembling the equipment. He must be suitably
trained and informed about the operations to perform and the safety plans of the site/installation location.
In this manual, the technician competent to carry out each operation is specified.
Skills required for the use and maintenance of the machine
Generic operator: AUTHORISED to run the machine using commands placed on the keypad of the electrical control
panel. Performs only machine control operations, power on/off.
Maintenance mechanic (qualified): AUTHORISED to carry out maintenance, adjustments, replacement and repair
of mechanical parts. It must be a person competent in mechanical systems, therefore able to perform mechanical
maintenance in a satisfactory and safe manner, must possess theoretical preparation and manual experience. NOT
AUTHORISED to work on electrical systems.
Manufacturer's technician (qualified): AUTHORISED to perform complicated operations in every situation.
Operates in accordance with the user.
Maintenance electrician (qualified): AUTHORISED to perform service of an electric nature, adjustments,
maintenance and electrical repairs. AUTHORISED to operate in the presence of an active electrical connection inside
the control panels and junction boxes. It must be a person competent in electronics and electrical engineering,
therefore able to work on electrical systems satisfactorily and safely, must possess theoretical knowledge and proven
experience. NOT AUTHORISED to work on mechanical systems.
Installers, users and maintenance staff for the machine must also:
- Be responsible and experienced adults without physical impairments, in perfect psychological and physical condition.
- Master the machine's operating cycle, therefore participate in theoretical/practical training alongside an expert machine operator,
or alongside a technician of the manufacturer.
In this manual, the technician competent to carry out each operation is specified.
7