Inserting and removing the card/
the battery
Set the camera ON/OFF switch
to OFF and slide the release
lever ( ) to [OPEN], then open
the card/battery door
Insert the battery and card,
making sure that their
orientation is correct
Battery: Push it in until it is locked by the
gray lever.
Card: Push it down until it clicks into place.
Close the card/battery door
Slide the release lever to the [LOCK]
position.
■
To remove
• To remove the battery:
Move the gray lever in the direction
of the arrow.
●
Use only the Leica battery BP-DC7 (→41).
●
Leica Camera AG cannot guarantee the quality of any other batteries.
●
Insert the card fully, otherwise it may be damaged.
48
Lever
[OPEN] [LOCK]
• To remove the card:
Push it further down until it
clicks, then pull it out upright.