Dimmensions; Technical Characteristics; Installation Of The Unit; Safety Instructions - Astralpool CDP Serie Manual Tecnico

Ocultar thumbs Ver también para CDP Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
ASTRALPOOL CDP LINE V2
Easy filter and machine cleaning.
OPTIONALS
Electrical post-heating elements with security thermostat.
Boiler coil with security thermostat.
3.2.

DIMMENSIONS

3.3.

TECHNICAL CHARACTERISTICS

Operational environment limits:
Further details:
IP class: IP44.
It is very important that there is no condensation within the operational environment limits, since it
can affect the electronics of the user interface and the probe. Warranty void if not respected.

4. INSTALLATION OF THE UNIT

4.1.

SAFETY INSTRUCTIONS

Please, read the safety instructions prior any manipulation:
Do not place heavy objects, pull, damage, heat up
or modify the electrical plug. The cable would be
damaged and it would cause electric discharges
and fire risk.
Never introduce rods, finger or other items in the
air inlet / outlet. The fan operates at great speed,
being able to cause a very serious incident.
Do not connect / disconnect the unit in use. It can
cause a fire due to the sparks, etc.
If any anomaly takes place (burning smell, etc.),
stop the unit, retrieve the plug or turn the power
off.
The unit must never be put under water or mud
discharges and the water outlet should never be
located in places exposed to strong winds.
Do not pull the power supply cord. There is a risk
of fire if the electrical cable is ripped off.
When unit maintenance must be undertaken,
switch it off and disconnect the unit or turn the
power off. The fan operates at great speed, being
able to cause a very serious incident.
Do not manipulate the plug with wet hands, since
it could cause an electrical discharge. In case of
storm, switch the unit off to avoid lightning
related damages.
1
Without condensation.
© ASTRALPOOL 2015 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
See IMAGE 1 (page 87).
AIR TEMPERATURE
MIN
20 ˚C / 68 ˚F
MAX
35 ˚C / 95 ˚F
Isolation type: I
IMPORTANT
to the plug or if does not plug in properly, it may
cause a fire or electric shocks.
KEEP AWAY FROM CHILDREN
If the unit continues working in abnormal
conditions, it can cause a fire or damages. Check
with its installer.
Installation or servicing should never be
performed by the client.
Connection: Do not tie an earth wire to a gas
pipe, bright-line viewfinder or telephone plug.
This would cause a fire risk.
Do not place animals or indoor plants in direct
contact with the air inlet/outlet. This would cause
injury to the animals and plants.
When the unit may not be used for some time,
unplug it or turn the power off.
Do not vaporize with insecticide or any other
flammable spray in the direction of the unit. This
would cause a fire and the distortion of the
housing.
See TABLE 1 (page77).
AIR HUMIDITY
45 % RH
1
1
90 % RH
Refrigerant gas: R410-A
:
Keep the plug clean. If dirt adheres
.
ENGLISH
Pag: 11

Publicidad

Tabla de contenido
loading

Tabla de contenido