To Operate Vacuum Cleaner; Power Cord - Panasonic MC-CG902 Instrucciones De Operación

Ocultar thumbs Ver también para MC-CG902:
Tabla de contenido

Publicidad

TO OPERATE VACUUM CLEANER

NOTE: To reduce the risk of electrical shock, this vacuum cleaner has a polarized
plug – one blade is wider than the other. This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. DO NOT CHANGE THE
PLUG IN ANY WAY. Only use outlets near the floor.
Cord Rewind Bar
Barre
de rappel
du cordon
Almacenamiento del
cordon eléctrico

Power Cord

➢ ➢ Pull cord out of canister to desired
length.
➢ ➢ Cord will not rewind until cord rewind
bar is pushed.
➢ ➢ Plug cord into 120-volt outlet located
near the floor.
TO REWIND:
➢ ➢ Unplug the vacuum cleaner.
➢ ➢ Hold the plug while rewinding to
prevent damage or injury from the
moving cord.
➢ ➢ Push cord rewind bar.
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
agitator when vacuum cleaner is on.
Contacting the agitator while it is
rotating can cut, bruise or cause
other injuries. Always unplug from
electrical outlet before servicing.
Use caution when operating near
children.
- 22 -

Publicidad

Tabla de contenido
loading

Tabla de contenido