Exhaust Filter Changing - Panasonic MC-CG902 Instrucciones De Operación

Ocultar thumbs Ver también para MC-CG902:
Tabla de contenido

Publicidad

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter or exhaust
filter cover installed.
Exhaust Filter Cover
Couvercle du filtre
d'échappement
Cubierta del filtro
de escape
Exhaust Filter
Filtre d'échappement
Filtro de escape
Exhaust Filter
Filtre d'échappement
Filtro de escape
Exhaust Filter Cover
Couvercle du filtre
d'échappement
Cubierta del filtro
de escape
Tabs
Languettes
Lengüetas

Exhaust Filter Changing

HEPA
➢ ➢ The exhaust filter cartridge must be
➢ ➢ Replace the filter when the entire
The filter CANNOT be washed as it will
lose its dust trapping ability.
➢ ➢ Pull up on the exhaust filter cover to
➢ ➢ Slightly push the exhaust filter
➢ ➢ Replace the exhaust filter cartridge,
➢ ➢ Replace the exhaust filter cover by
- 36 -
EXHAUST FILTER
replaced when dirty.
surface area is covered evenly.
CAUTION
remove from the motor cover and lay
aside.
cartridge to the side, as shown in the
illustration, and pull up to remove.
carefully positioning it so that the
side shown in the illustration goes
down under the ribs. Then push the
other side down until it snaps into
place. Place the new filter into the
motor cover with the foam seal
down.
engaging the two tabs on the rear
and pushing down in front until it
snaps closed.

Publicidad

Tabla de contenido
loading

Tabla de contenido