Power Saving Mode; Battery Replacement - Oakley Double Tap Manual De Instrucciones

9 | DOUBLE TAP INSTRUCTION MANUAL

POWER SAVING MODE

When the timepiece is not in use, the battery life can be prolonged by pulling the crown out to the second click position
(b). This will stop the hands and reduce power consumption.

BATTERY REPLACEMENT

The miniature battery that powers the timepiece is designed to last approximately 48 months. However, because the
battery is inserted at the factory for extensive performance checks, its actual life, once in your possession, may be less.
Battery replacement may be performed only by an Authorized Oakley Service Center. Any attempt to open the watch
case by persons other than Authorized Oakley Service Professionals will void the product warranty.
Within the United States, call Oakley global headquarters at 1-800-403-7449 to find an Authorized Oakley Timepiece
Service Professional near you. Customers outside the United States should contact their local Authorized Oakley
Timepiece Dealer or visit the Oakley website at www.oakley.com for the number of the nearest Oakley distributor.
BAND ADJUSTMENT
Not all Oakley Timepieces are available with a metal bracelet, leather strap or rubber strap; refer to the information below
as it applies to your watch.
METAL BRACELET MODEL
If the links need to be added or removed from the band, the adjustment should be done by an Authorized Oakley Timepiece
Dealer. Do not attempt to shorten the bracelet by removing the links yourself, as this may result in damage.
RUBBER STRAP MODEL
For the right fit, some rubber strap models with deployant clasp closures may require trimming of the rubber strap itself.
An Authorized Oakley Timepiece Dealer should do the adjustment. Do not attempt to shorten the rubber strap
yourself, as this may result in damage.
LEATHER STRAP MODEL
The natural leather of the strap may stretch slightly during break-in, so adjust the fit accordingly.