Using The Chronograph - Oakley Double Tap Manual De Instrucciones

6 | DOUBLE TAP INSTRUCTION MANUAL

USING THE CHRONOGRAPH

The chronograph includes two separate hands:
• The large, narrow hand on the main dial face counts
seconds. One full rotation is 60 seconds.
• The sub dial at the left of the dial face counts minutes.
One full rotation is 30 minutes.
The chronograph is controlled with two push buttons:
• Button "A" starts and stops the timer.
• Button "B" has several functions. It is used to pause
the display at the current split time (also called
"intermediate time"). It is also used to make the
chronograph hands move forward to the ongoing
time being measured. Finally, it is used to reset the
chronograph hands to the zero position.
Before using the chronograph, ensure the crown is
fully screwed in against the case and not at one of the
click positions used for setting time and date. The two
chronograph hands should align precisely at the zero
position. If they do not, see the section on Adjusting the
Chronograph Hands.
Hour Hand
Chronograph
Minutes
Counter
Date
Chronograph
Second Counter
Button A
Minute Hand
Crown
Second Hand
Button B