Lubrication; Replacement Parts - Franklin Electric INLINE CONSTANT PRESSURE SYSTEM El Manual Del Propietario

mAINTENANCE

LUBRICATION

The pump requires only water for lubrication and must never be run dry.
WA R N I N G
off. After reassembling the pump, refer to priming instructions before running.
servicing unit.
DRAINING
NOTICE: Disconnecting the pump will not necessarily drain all other parts of the piping system. If there
Hazardous voltage.
are any concerns with the proper procedure or necessity of draining the suction plumbing, contact a
Can shock, burn, or
water systems professional.
cause death.
All piping and water tanks exposed to freezing weather should be drained. If there are any concerns with
the proper procedure to drain the system's pressure tank, contact the tank manufacturer for assistance.
Ground pump before
connecting to power
supply. Disconnect
power before working
on pump, motor
or tank.

REPLACEMENT PARTS

14D
6D
7D
7D
13D
6D
13D
W A R N I N G Before disconnecting pump, be sure fuse box leads are disconnected or power is turned
W A R N I N G Hazardous voltage can shock, burn or cause death. Disconnect power to pump before
(6 Places)
6D
(6 Places)
7D
(6 Places)
1A
5D
2A
(2 Places)
4C
6D
7D
8D
9D
11D
3B
4C
6D
6D
13D
7D
6D
13D
10D
(2 Places)
16F
12D
Pressure
Sensor
15A,E
18H
Pressure Shut-off
Sensor Optional
17G
19
7