Selecting A Configuration Option - SMA SUNNY BOY STORAGE 3.8-US Instrucciones De Instalación

Ocultar thumbs Ver también para SUNNY BOY STORAGE 3.8-US:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SMA Solar Technology AG
7.5

Selecting a configuration option

After you have logged onto the user interface as Installer, the Configuring the Inverter page
opens.
A
E
D
Figure 18 : Layout of the Configuring the Inverter page
Position
Designation
A
Device information
B
User information
C
Skip configuration
D
Checkbox
E
Configuration options
Procedure:
On the Configuring the Inverter page, different configuration options are available to choose
from. Select one of the options and proceed for the selected option as described below. SMA
Solar Technology AG recommends carrying out the configuration with the installation assistant. This
way, you ensure that all relevant parameters are set for optimal inverter operation.
• Adoption of configuration from a file
Installation Manual
Description
Provides the following information:
• Device name
• Inverter serial number
• Inverter firmware version
Provides brief information on the listed configuration
options
Offers the option of skipping the inverter configura-
tion and going directly to the user interface (not rec-
ommended; the inverter cannot be operated without
configuration)
Allows you to choose not to have the displayed page
displayed again when the user interface is called up
again
Provides a selection of the various configuration op-
tions
SBSxx-US-10-IA-xx-12
7 Commissioning
B
C
63

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sunny boy storage 5.0-usSunny boy storage 6.0-us

Tabla de contenido