Selecting A Configuration Option - SMA SUNNY BOY STORAGE Serie Instrucciones De Instalación

7 Commissioning
7.5

Selecting a configuration option

After you have logged onto the user interface as Installer, the Configuring the Inverter page
opens.
A
E
D
Figure 10 : Layout of the Configuring the Inverter page
Position Designation
A Device information
B User information
C Skip configuration
D Checkbox
E Configuration options
Procedure:
On the Configuring the Inverter page, different configuration options are available to choose
from. Select one of the options and proceed for the selected option as described below. SMA
recommends carrying out the configuration with the installation assistant. This way, you ensure that
all relevant parameters are set for optimal inverter operation.
• Adoption of configuration from a file
56 SBSxx-US-10-IA-xx-11
SMA Solar Technology America LLC
Description
Provides the following information:
• Device name
• Inverter serial number
• Inverter firmware version
Provides brief information on the listed configuration
options
Offers the option of skipping the inverter configura-
tion and going directly to the user interface (not rec-
ommended; the inverter cannot be operated without
configuration)
Allows you to choose not to have the displayed page
displayed again when the user interface is called up
again
Provides a selection of the various configuration op-
tions
B
C
Installation Manual