Anatomy Of The Helmet - SCHUBERTH M1 Guia De Inicio Rapido

1. ANATOMY OF THE HELMET

Visor
Sun visor
Loudspeaker
Microphone
Chin strap with
ratchet fastener
We recommend that, in addition to carefully reading the Quick Start Guide, you
should also read the instructions for the SRC-System
the functions and the correct operation.
To find the complete manual please go to:
www.SCHUBERTH.com
6
Head ventilation
Inner shell
Reflective eyes
Head ventilation
Visor mechanism
Outer shell
Inner lining
Restraint system
(with anti-roll-off-
system)
Sun visor control
™ , in order to understand all
2. HEAD VENTILATION AND SUN VISOR
3. OPENING AND CLOSING THE CHINSTRAP
To close the chinstrap fastener, slide the ratchet tongue step by step into the
locking buckle. If you find that the chinstrap fits too loosely around your chin,
slide the ratchet tongue one step further into the locking buckle.
4. ADJUSTING THE CHINSTRAP
The length of the chinstrap is adjusted by increasing or reducing the length of
strap pulled through the metal buckles. Adjust the length of the chinstrap so that
it fits firmly but comfortably under your chin and fix the end of the strap using the
retaining loop with comfort pad.
EN
7