The Helmet; Ece Approval; Anatomy The Helmet; Outer Shell - SCHUBERTH C3 PRO Manual Del Usuario

C. THE HELMET
1. STANDARD
The C3 Pro conforms to the ECE-R 22.05 standard. This testing
norm guarantees conformity to defined safety standards in
respect of impact absorption, visor, retention system and field
of vision. The certification applies to all the countries of the
European Union and all countries that recognise the ECE standard.
It also guarantees conformity with all insurance requirements
that are important in the event of a claim.
Please note that this C3 Pro with ECE approval is not certified for
the USA, Canada or any other EU countries. It is only permitted
for use in countries where the ECE standard is valid.
Note:
The only SCHUBERTH helmets that it is legal to use in the
USA, Canada or other non-EU countries are those with the
appropriate approval and technical specifications.
Further information and details of sales outlets for these
helmets can be found on the internet at:
www.schuberth.com/us/home

2. ECE APPROVAL

ECE test standard
Certification number
051234/P-1234
58
Certifying authority
Serial number
3. ANATOMY OF THE HELMET
Integrated antennas
Face shield
Reflective panels
Sun visor
Inner lining
Head ventilation
Face shield/
chin ventilation
Chin bar release

4. OUTER SHELL

The outer shell of the C3 Pro helmet combines an aerodynamically
optimal shape with consistent protection. It consists of a special
glass-fibre reinforced duroplastic matrix developed by SCHUBERTH,
which gives the helmet the high level of strength needed for your
protection.
Caution:
The safety helmet is designed to absorb the effects of only
one impact. The helmet must be replaced after a fall,
accident or any other impact.

5. INNER SHELL

For optimised impact absorption properties, the inner shell
of the helmet consists of several components. The complex
multi-segment foam padding of the main body provides better
absorption and dissipation of impact forces and gives you the
highest level of safety. The large side panels ensure the helmet
sits optimally and comfortably.
Head ventilation
Inner shell
Pinlock ® visor
Visor mechanics
Outer shell
Retention system
(with anti-roll-off system)
Operating slide for
sun visor
Chinstrap buckle
59