Part One; General Information; Terms Of The Guarantee - EMAK IC2050 Manual De Istrucciones

This manual is divided into two separate sections.
The first is for use by the end user and the Skilled Technician; the second is for use by the Skilled
Technician alone.
Skilled Technician means a person, generally employed by the service centre, who has received
appropriate training and is authorised to carry out special maintenance and repairs on the appliance
(the term "appliance" is used to indicate both trolleys and barrows). Any work on electrical parts
must be carried out by a Skilled Technician who is also a Qualified Electrician, i.e. a person with
professional training who is authorised to check, install and repair electrical equipment correctly
and according to the current regulations in the country where the appliance is installed.
The appliances are supplied in a kit and must be assembled; the motor-driven pump (operated
by an electric motor or combustion engine) must be the type recommended by the Manufacturer.
Other types of motor-driven pumps must not be used unless prior authorisation is granted by the
Manufacturer.
The kits must be assembled and the motor-driven pump must be installed by a Skilled Technician
according to the instructions contained in part two of these instructions.
The Declaration of Conformity contained at the end of this section in the instructions is only
guaranteed if the above requisites are met.

1. GENERAL INFORMATION

Congratulations for choosing one of our products! We would like to remind you that we took the
safety of the operator, the efficiency of its use and the protection of the environment into great
consideration when designing and manufacturing this product.
In order to preserve its features over time, please read and follow these instructions carefully.
Particular attention must be awarded to the parts with the following symbol:
as they contain important instructions regarding safety when using the appliance.
The Manufacturer is not liable for damage caused by:
• failure to comply with these instructions and the instructions for the combustion engine, if
any, used with the appliance;
use of the appliance not included in the list in the "DESIGNATED USE" section;
•
• failure to comply with current safety regulations and regulations for the prevention of
accidents in the workplace when using the appliance;
• tampering with the safety devices and devices limiting the maximum operating pressure
• incorrect installation
• failure to carry out the required maintenance;
• modifications or actions without prior authorisation by the Manufacturer;
• use of non-original or non-specific spare parts or accessories for this model of appliance;
repairs which were not carried out by a Skilled Technician.
•

1.1 TERMS OF THE GUARANTEE

The guarantee is valid for a period of 24 months from the date on the sales document (receipt,
30
INTRODUCTION

CAUTION

PART ONE


CAUTION