Address Of The Manufacturer; Use And Conservation Of These Operating And Maintenance Instructions - EMAK IC2050 Manual De Istrucciones

invoice etc.) provided the guarantee certificate included with the appliance's documents was sent
back to the Manufacturer within 10 days of the purchase date with all its parts filled in.
The purchaser has sole right to the replacement of the parts that are deemed faulty by the
Manufacturer, or by his authorised representative, as regards their material or manufacture. This
does not imply any right to compensation for any type of direct or indirect damage. Any costs for
labour, packing and transportation are at the purchaser's expense.
Should the product be sent to the Manufacturer for repairs under this guarantee, on arrival it must
be complete with all its original parts and not be tampered with. Any request under this guarantee
will be refused if this is not the case.
All replaced parts become the property of the Manufacturer.
Any faults or failures which occur during or after the period of the guarantee do not imply the right
to suspend payment or to any further extension.
This guarantee does not cover the replacement of the appliance and automatically becomes void
should the agreed terms of payment not be abided by.
The following are not covered by the guarantee:
• direct or indirect damage, of any type, caused by falls, incorrect use of the appliance and
failure to observe regulations regarding safety, installation, operation and maintenance which
are contained in these instructions and the instructions for the combustion engine, if any,
used with the appliance;
• damages due to the inactivity of the appliance for repairs;
• any parts which are subject to wear during normal use;
• any parts which are deemed faulty due to negligence or carelessness during use;
• damage caused by the use of non-original spare parts or accessories or any not expressly
authorised by the Manufacturer, and by repairs not carried out by a Skilled Technician
• damage caused by incorrect electrical power supply or the use of unsuitable fuel.
The guarantee becomes void should the appliance be tampered with, especially its safety and
maximum pressure limiting devices, and the Manufacturer will no longer be held liable.
The Manufacturer reserves the right to make any modification at any time which it deems
necessary to improve the product and is not liable to make these modifications to previously
manufactured products, be they delivered or under delivery.
The conditions in this section exclude any previous explicit or implicit condition.
1.2 THE ADDRESS OF THE MANUFACTURER
The address of the Manufacturer of this appliance is given in the Declaration of Conformity at
the end of this part of the instruction manual.
1.3 USE AND CONSERVATION OF THESE OPERATING AND MAINTENANCE
INSTRUCTIONS

CAUTION
• These operating and maintenance instructions must be used in conjunction with those for the
combustion engine, if any, which is used with the appliance. The latter, which is taken as
copied in full in this booklet, must always be kept with the appliance and read carefully in
addition to these instructions.
The operating and maintenance instructions are an integral part of the appliance and they must
be kept in a safe place for future reference so that they may be readily consulted in case of need.
The operating and maintenance instructions contain important information for the safety of the
operator and of any people near him and for the protection of the environment.
31