Special Maintenance; Moving And Transportation - EMAK IC2050 Manual De Istrucciones

WARNING
• To avoid the negative consequences of this malfunction, stop operation of the appliance
immediately and contact a Skilled Technician without delay (within 24 hours) who will
take the necessary action.
If it is not possible to contact a Skilled Technician within the above time in case of
diaphragm rupture, we recommend you drain the pump crankcase of the mixed oil and
pumped liquid and then fill it with oil or diesel to prevent the formation of rust.
• The following are frequently the causes of diaphragm rupture:
- bottlenecks in the intake circuit (inadequate hose section, very dirty filter, very dense
liquid being pumped, etc)
- the use of very aggressive chemicals
6.3

SPECIAL MAINTENANCE


CAUTION
• Only Skilled Technicians are authorised to carry out special maintenance.
• Dispose of waste oil correctly; do not dump it in the environment
Follow the instructions in the table below for special maintenance.
For appliances fitted with a combustion engine, remember to follow the instructions for special
maintenance in the engine's operating and maintenance instructions
(*) Check more frequently if liquids are used with suspended abrasive particles.
(**) Oil must also be changed when diaphragms are replaced.
(***) For MC 20/20 and MC25, change when pump oil is changed
(****) We recommend replacing diaphragms regardless of their condition if particularly
aggressive chemicals are used
WARNING
• The data in the table is approximate. Maintenance may be required more frequently in
cause of particularly heavy use.

7. MOVING AND TRANSPORTATION


CAUTION
• Follow the instructions in the "Switching off" section before moving or transporting the
appliance.
• When the appliance has to be transported, remember to anchor it firmly to the means of
transport (using cables or other systems, as appropriate) and to empty the tank.
• Hold the handle (7) firmly to avoid losing your grip if knocks and bumps are caused by
44