Dismantling And Disposal; Problems, Causes And Solutions - EMAK IC2050 Manual De Istrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100
uneven ground. It is important to bear this in mind if the tank is full and the ground is wet.
Only move the appliance by means of the grips on the handle (7).
Do not move the appliance if it is on a slope in excess of 2% or if the ground is very wet.

8. DISMANTLING AND DISPOSAL

Only trained personnel are allowed to dismantle the appliance in accordance with the current
regulations in the country where it is installed.
CAUTION
Before disposing of the appliance, make sure it is no longer possible to operate it, by
cutting the power supply cable for example. Make sure all its parts are now inoffensive, as
they could prove to dangerous to children playing.

9. PROBLEMS, CAUSES AND SOLUTIONS

CAUTION
Before taking any steps, follow the instructions in the "Switching off" section. If it is not
possible to restore correct operation of the appliance using the information in the table
below, contact a Skilled Technician.
45

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sc150Ic2050eSc150eIc2080Sc180Ic2080e ... Mostrar todo

Tabla de contenido