Adjusting The Volume; Changing The Hearing Program; Further Adjustments (Optional) - signia Pure Charge&Go Nx Manual De Instrucciones

Removing a hearing instrument:
Lift the hearing instrument
X
and slide it over the top of
➊
your ear .
If your hearing instrument is
X
equipped with a custom shell
or a Click Mold, remove it by
pulling the small removal cord
toward the back of your head.
For all other ear pieces: Grip the receiver in the
X
ear canal with two fingers and pull it carefully out
Do not pull the receiver cable.
CAUTION
Risk of injury!
In very rare cases the ear piece could remain in
X
your ear when removing the hearing instrument.
If this happens, have the ear piece removed by
a medical professional.
Clean and dry your hearing instruments after usage.
Read more in section "Maintenance and care".
Adjusting the volume
Your hearing instruments automatically adjust the volume
to the listening situation.
If you prefer manual volume adjustment, press the
X
push button.
16
Refer to section "Controls" for the setting of your
push button.
An optional signal can indicate the volume change.
Once the maximum or minimum volume has been
reached, you may hear an optional signal tone.

Changing the hearing program

Depending on the listening situation, your hearing
instruments automatically adjust their sound.
➋
.
Your hearing instruments may also have several hearing
programs which allow you to change the sound, if needed.
An optional signal tone can indicate the program change.
To change the hearing program, press the push button
X
briefly.
Refer to section "Controls" for the setting of your
controls. Refer to section "Hearing programs" for a list
of your hearing programs.
The default volume is applied.
Further adjustments (optional)
The controls of your hearing instruments can also be used
to change, for example, the tinnitus therapy
signal level.
Refer to section "Controls" for the setting of your controls.
17