Adjusting The Volume; Changing The Hearing Program - signia Pure 312 Nx Guia Del Usuario

Removing a hearing instrument:
Lift the hearing instrument and
X
slide it over the top of your
➊
ear .
If your hearing instrument is
X
equipped with a custom shell
or a Click Mold, remove it by
pulling the small removal cord
toward the back of your head.
For all other ear pieces: Grip the receiver in the
X
ear canal with two fingers and pull it carefully out
Do not pull the receiver cable.
CAUTION
Risk of injury!
In very rare cases the ear piece could remain in
X
your ear when removing the hearing instrument.
If this happens, have the ear piece removed by
a medical professional.
Clean and dry your hearing instruments after usage.
Read more in section "Maintenance and care".
18
Adjusting the volume
Your hearing instruments automatically adjust the volume
to the listening situation.
If you prefer manual volume adjustment, press the
X
rocker switch.
Refer to section "Controls" for the setting of the
rocker switch.
An optional signal tone can indicate the volume change.
Once the maximum or minimum volume has been
reached, you may hear an optional signal tone.
➋
.

Changing the hearing program

Depending on the listening situation, your hearing
instruments automatically adjust their sound.
Your hearing instruments may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the program
change.
To change the hearing program, press the
X
rocker switch.
Refer to section "Controls" for the setting of the
rocker switch. Refer to section "Hearing programs" for
a list of your hearing programs.
The default volume is applied.
19