Megger MJ10 Guia Del Usuario página 28

Specification
Overload Rating:
Temperature Range:
Humidity Range:
Power Supply:
Battery life:
Safety:
Fuses:
Flash Test:
E.M.C:
Operational uncertainties
Dimensions:
Weight:
Cleaning:
28
Operating
Storage
Operating
Storage
MJ10
BM12
MJ10
BM12
MJ10
BM12
GENERAL
1200 V a.c. or d.c. for 10 seconds on 1 kV test voltage range 600 V
a.c. or d.c. on remaining ranges.
–10 °C to +50 °C
–20 °C to +70 °C
50% R.H. max. at 40 °C (70% R.H. at 20 °C)
95% R.H. max. at 35 °C
Low voltage brushless a.c. generator
Six 1,5 V cells IEC LR6 type
Typically 1300 Insulation or Continuity range tests
The instrument(s) meet the requirements for double insulation to
IEC 1010 -1 (1995) EN 61010-1 (1995) to Installation Category II*,
300 Volts phase to earth (ground).
500 mA FF 660 V Ceramic 50 kA HBC 32 mm x 6 mm Ferraz type
D86483 or similar
7 A (F) HBC 10 kA
6 kV a.c. r.m.s.
In accordance with IEC61326 including amendment No.1
Refer to www.megger.com
210 mm x 128 mm x 125 mm (including generator handle)
(8 ⁄ in x 5 in x 5 in approx.)
1
4
180 mm x 128 mm x 125 mm (7 in x 5 in x 5 in approx.)
1 kg (2,2 lb)
1 kg (2,2 lb)
Wipe disconnected instrument with a clean cloth dampened with
soapy water or isopropyl alcohol (IPA).