Using The Camera - JVC GV-LS1 u Guia Basica Del Usuario

Using the Camera

Viewing on a Browser
1 Start Internet Explorer, and enter
"http://192.168.1.100:80" in the
address bar.
2 Enter the user name and password
of the administrator.
Initial setting: USERNAME "root",
PASSWORD "password".
• To watch a video via a network, the
"MONITORING SETTINGS" (p.10) are
required. Entering the user name and
password of our DDNS service allows
you quick access.
To acquire a DDNS service account,
visit our website
https://dd3.jvckenwood.com/user/
<Example of browser>
1
2
3
1 Tab: Switch the display. (Monitor:
Camera image and control panel,
File: Images on the SD card, Status:
Message history)
2 Control panel: Controls the camera/
electric pantilter.
3 Message Bar: Displays an error
message, etc.
4 Logout: Click this to log out.
5 Status: Indicates the current status
such as the remaining battery power.
6 Stream settings: Displays the stream
settings.
12
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
Installing the Supplied Software
"JVC CAM Control" allows you to control
multiple cameras, change the angle, etc.
1 Insert the supplied software CD-
ROM into the CD/DVD drive of your
computer.
2 Click "JVC_CAM_Control_1.0.0.0
(JVC_CAM_Control_1.0.0.0.exe)" on
the auto play window.
• If the auto play window does not
• Follow the on-screen instructions to
• If the user account control window
4
• 2 icons appear on your desktop
5
6
appear, double-click the "JVC_
CAM_Control_1.0.0.0 (JVC_CAM_
Control_1.0.0.0.exe)" icon in the
software CD-ROM.
complete the installation.
appears, click "Yes".
when installation is complete.