Preparation Before Use - JVC GV-LS1 u Guia Basica Del Usuario

Preparation before Use

Connecting the Camera to
Your Computer
To set up the camera, fi rst connect it to
your computer.
Required operating environment
Browser: Internet Explorer 9 or later
1 Attach the supplied LAN cable to
the camera.
RESET
ETHERNET
2 Connect the camera to your
computer via the LAN cable.
3 Set the network mode switch to
[LAN (OFF)].
DIRECT WLAN LAN(OFF)
• If the network mode switch is set to
[DIRECT] or [WLAN], the LAN terminal
cannot be used.
• While the power is on, switching the
network mode switch does not change
the setting.
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
MIC
DC
DIRECT WLAN LAN(OFF)
AV
BATT.
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERNET
Connecting the AC Adapter
Connect the supplied AC adapter to the
DC connector.
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERNET
9