JVC GV-LS1 u Guia Basica Del Usuario página 10

Configuring the Camera Settings
Appropriate for Your Needs
Specify the video format, etc. appropriate
for your needs. Confi gure the settings on
a browser.
Logging in as an administrator
1 If the power is not turned on, press
and hold the [POWER] button to
power on.
The record button starts blinking. Wait
until it stops blinking and goes off.
2 Set the Network Setting of the
computer as follows.
IP Address: 192.168.1.2 to
192.168.1.254 (except 192.168.1.100)
(example) 192.168.1.23
Subnet mask: 255.255.255.0
Make a note of the current network
settings before operation for resetting
the network setting.
3 Start Internet Explorer, and enter
"http://192.168.1.100:8000" in the
address bar.
4 Enter the user name and password
of the administrator.
Initial setting: USERNAME "root",
PASSWORD "password".
If login is successful, the setup screen
appears.
10
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
Changing the settings
Select "NETWORK", "CAMERA", or
"MANAGE" in the left window of the
screen to change the settings. Click "+"
on the left of each item to show the sub
categories.
● "NETWORK"
• "WIRED NETWORK"
For establishing a wired connection.
• "WIRELESS NETWORK"
For connecting wirelessly.
• "MONITORING SETTINGS"
For connecting via a network.
• "STREAM SETTINGS"
Format for transmitting/recording.
● "CAMERA"
• "CAMERA SETTINGS"
Camera settings.
● "MANAGE"
• "COMMON SETTINGS"
Change the password of the
administrator, set the clock, etc.
• "MEDIA MANAGEMENT"
Format the SD card.
• "TURN OFF CAMERA"
Turn off the power of the camera.
* The power cannot be turned on via
the browser.
For details, refer to the "Detailed User
Guide".