Ingersoll Rand EXPERT TORQUE TESTER Serie Manual Del Usuario página 2

•
Do not drop or abuse the unit.
•
Turn the unit off when not in use.
•
Stay alert. Watch what you are doing. Use
common sense.
•
Check damaged parts. Before further use of the
unit, a guard or other part that is damaged should
be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere
in this operation manual.
FAILURE TO OBSERVE THE FOLLOWING CAUTIONS COULD RESULT IN INJURY.
•
The unit should be checked periodically to ensure
that the zero point is adjusted properly and that the
torque readings are accurate. The zero point may
drift due to changes in the temperature.
•
DO NOT store the Torque Tester in relative
humidity above 85%.
The use of other than genuine Ingersoll-Rand replacement parts may result in personal injury, decreased performance
and increased maintenance, and may invalidate all warranties.
Have your unit repaired by a qualified person. This electric unit is in accordance with the relevant safety require-
ments.
Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in consid-
erable danger to the user.
Repairs should be made only by authorized, trained personnel. Consult your nearest Ingersoll-Rand Authorized Servi-
center.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.
Using the Torque Tester Unit (Continued)
CAUTION
WARNING SYMBOL IDENTIFICATION
Read this manual before
operating tool.
•
Have defective switches replaced by an authorized
service center.
•
Do not use the unit if the power-button does not
work.
•
Do not allow chemicals such as acetone, benzene,
thinner, ketone, trichloroethylene or other similar
chemicals to come in contact with the housing, as
damage will result.
•
The use of any accessory or attachment other than
recommended in this manual can present a risk of
personal injury.
•
DO NOT operate the Torque Tester without an
adapter between the tool and the Tester.
•
Have the unit calibrated at least once a year.
•
Keep the exterior of the Tester clean and dry.
WARNING
2
WARNING
Always wear hearing
protection when operating
this tool.