Tabla De Contenido - moovo LN4 Serie Instrucciones Y Advertencias Para La Instalación Y El Uso

GENERAL SAFETY WARNINGS AND
PRECAUTIONS
STEP 1
- Working in safety!
- Installation warnings
KNOWLEDGE OF THE PRODUCT AND PREPARATION
FOR INSTALLATIONE
STEP 2
2.1 - Product description and intended use
2.2 - Components used to set up a complete system
STEP 3
Preliminary checks for installation
3.1 - Checking suitability of the environment and gate to be automated
3.2 - Checking product application limits
STEP 4
4.1 - Preliminary set-up work
- 4.1.1 - Typical reference system
- 4.1.2 - Establishing positions of components
- 4.1.3 - Establishing the positions of the gearmotor
- 4.1.4 - Establishing the device connection layout
- 4.1.5 - Checking the tools required for the work
- 4.1.6 - Completing the set-up work
4.2 - Preparing the electrical cables
INSTALLATION: COMPONENT ASSEMBLY AND
CONNECTIONS
STEP 5
- Installing the automation components
STEP 6
- System device installation and connection
6.1 - Selection the gearmotor position with respect to the gate, on the
control unit
6.2 - Installing and connecting flashing light mod. MF
6.3 - Installing and connecting photocells mod. MP
- Selecting the photocell pair operating mode
6.4 - Installing and connecting keypad mod. MK
6.5 - Installing buffer battery mod. MB
POWER SUPPLY CONNECTION
STEP 7
INITIAL START-UP AND ELECTRICAL CONNECTION
CHECK
STEP 8
PROGRAMMING THE AUTOMATION
STEP 9
9.1 - Memorising the devices connected by means of "Bus" cable and the leaf
"Closing" and "Opening" limit positions
9.2 - Memorisation of transmitter mod. MT4
9.3 - Programming keypad mod. MK
ADJUSTMENTS AND OTHER OPTIONAL FUNCTIONS
10 - Automation operation adjustment
11 - Memorisation of a new transmitter with control unit "in the vicinity"
12 - Deleting data from the control unit memory
13 - Automation testing and commissioning
14 - Installing and connecting a buffer battery
CONTENTS
WHAT TO DO IF ... (troubleshooting guide)
TASKS RESERVED FOR QUALIFIED TECHNICIANS
4
- Connecting the automation to the electrical mains with a cable other than
that supplied
4
- Automation testing and commissioning
- Product disposal
TECHNICAL SPECIFICATIONS OF PRODUCT
COMPONENTS
5
5
Enclosures: "TECHNICAL DOCUMENTATION"
6
6
6
7
7
7
7
7
8
8
8
9
11
12
12
14
15
16
17
18
18
19
20
20
21
21
22
22
22
23
24
25
25
26
I - VII
English - 3