Honda WX10T Manual Del Propietário página 32

4. Clean the air cleaner element in warm soapy water, rinse, and allow to dry
thoroughly. Or clean in nonflammable solvent and allow to dry.
5. Dip the air cleaner element in clean engine oil, and then squeeze out all
excess oil. The engine will smoke when started if too much oil is left in the
foam.
Clean
6. Wipe dirt from the air cleaner body and cover, using a moist rag. Be careful to
prevent dirt from entering the carburetor.
7. Reinstall the air cleaner element.
8. Reinstall the air cleaner cover by inserting the lower tabs, and the latch tab.
Squeeze and Dry
Do not twist.
Dip in Oil Squeeze
Do not twist.
29