Specifications - Honda WX10T Manual Del Propietário

12. SPECIFICATIONS

Model
Power equipment description code
Dimensions and Weight
Length
Width
Height
Dry mass (weight)
Engine
Model
Engine type
Displacement
[Bore × Stroke]
Engine Net power
(in accordance with SAE J1349*)
Engine Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
Carbon dioxide (CO2) emissions**
* The power rating of the engine indicated in this document is the net power
output tested on a production engine for the engine model and measured in
accordance with SAE J1349 at 7,000 min
-1
5,000 min (Engine Max. Net Torque). Mass production engines may vary
from this value.
Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the
engine in application, environmental conditions, maintenance, and other
variables.
** The CO2 measurement results from testing over a fixed test cycle under
laboratory conditions a(n) (parent) engine representative of the engine type
(engine family) and shall not imply or express any guarantee of the
performance of a particular engine.
40
340 mm (13.4 in)
220 mm (8.7 in)
295 mm (11.6 in)
6.1 kg (13.4 lbs)
4-stroke, overhead camshaft, single cylinder
25.0 cm
35.0 × 26.0 mm (1.38 × 1.02 in)
0.72 kW (1.0 PS)/7,000 min
1.0 N·m (0.10 kgf·m, 0.74 lbf·ft)/5,000 min
0.08 L (0.08 US qt, 0.07 lmp qt)
0.53 L (0.140 US gal, 0.117 lmp gal)
Forced air
Transistor magneto
Counterclockwise
Please refer to "CO2 Information List" on
www.honda-engines-eu.com/co2
-1
(Engine Net Power) and at
WX10T
WAGT
GX25T
3
(1.53 cu-in)
-1
-1