Honda WX10T Manual Del Propietário página 35

6. Check that the sealing washer is in good condition, and thread the spark plug
in by hand to prevent cross-threading.
7. After the spark plug is seated, tighten with a spark plug wrench to compress
the washer.
TORQUE: 11.8 N·m (1.2 kgf·m, 9 lbf·ft)
NOTE:
If installing a new spark plug, tighten 1/2 turn after the spark plug seats to
compress the washer.
If reinstalling a used spark plug, tighten 1/8–1/4 turn after the spark plug seats
to compress the washer.
CAUTION:
• The spark plug must be securely tightened. An improperly tightened
spark plug can become very hot and may cause engine damage.
• Use only the recommended spark plug or equivalent. Spark plugs which
have an improper heat range may cause engine damage.
8. Attach the spark plug cap securely.
9. Install the top cover, and tighten the 5 mm hex socket bolt securely with a
hexagon wrench.
32