Honda WX10T Manual Del Propietário página 40

4. Change the engine oil (see page 26).
5. Clean the air cleaner (see page 29).
6. Remove the top cover (see page 30).
7. Remove the spark plug (see page 31).
8. Apply a couple of drops of clean engine oil into the cylinder.
9. Install the top cover temporarily.
10.Pull the starter grip several times to distribute the oil in the cylinder.
11.Remove the top cover, and then reinstall the spark plug.
12.Install the top cover, and tighten the 5 mm hex socket bolt securely.
13.Move the choke lever to the CLOSED (upwards) position (see page 19).
14.Pull the starter grip slowly until resistance is felt.
15.Cover the pump to keep out dust.
37