Honda WX10T Manual Del Propietário página 34

2. Remove any dirt from around the spark plug area.
3. Disconnect the spark plug cap and use the proper size spark plug wrench to
remove the spark plug.
4. Visually inspect the spark plug. Discard the spark plug if there is apparent
wear, or if the insulator is cracked or chipped. Clean the spark plug with a wire
brush if it is to be reused.
5. Measure the plug gap with a feeler gauge.
Correct as necessary by bending the side electrode.
The gap should be:
0.6–0.7 mm (0.024–0.028 in)
SIDE ELECTRODE
SEALING WASHER
SPARK PLUG CAP
SPARK PLUG WRENCH
0.6–0.7 mm
(0.024–0.028 in)
INSULATOR
31