Jacuzzi J-315 Manual De Instalacion Y Uso & Mantenimiento página 32

11. Sub-Woofer (SUBW) Button: Press the SUB-W button to ac-
tivate the Sub-woofer function On, and "Sub-woofer" will appear on
the LCD display for 3 seconds. Press the SUB-W button again to turn
off the Sub-woofer function.
12. 2 Zone Button: The feature is not used.
13. iX-Bass Button (XBAS) Button: Press the iX-BASS button
to turn on the iX-BASS function, and "iX-BASS" will appear in the LCD
display for 3 seconds. Press the iX-BASS button again to turn off the
iX-Bass function.
14. AS/PS (Automatically Store/Preset Scan) Button: Whi-
le in seek mode the stereo unit will automatically select 6 strong sta-
tions and store them in the current band. Select a band (if needed).
Preset Scan: Scan stations stored in the current band. Select a band
(if needed). Press AS/PS button for less than 3 seconds. The unit
will pause for ten seconds at each preset station. Press AS/PS but-
ton again to stop scanning when the desired station is reached.
Stereo: The unit will automatically pick up a stereo signal when
available. When in stereo mode, the ST icon appears in the di-
splay. When no stereo signal is available, the unit will automati-
cally revert to mono operation, and no icon will be displayed.
15. Preset 1/Pause Play Button: In Tuner mode, any station can
be stored as preset 1 by pressing and holding this button for 2
seconds, after the desired station is selected. To recall the sta-
tion preset, simply press and release this button. In CD mode,
pressing this button will pause or play the CD. When inserting
a CD make sure the label side is facing up.
16. Preset 2/INT Button: In Tuner mode, any station can be
stored as preset 2 by simply pressing and holding this button for
2 seconds, after the desired station is selected. To recall the sta-
tion preset, simply press and release this button. In CD mode,
pressing this button will preview each song on the disc for about
10 seconds. Press again to turn off this feature or once the de-
sired track is reached.
17. Preset 3/RPT Button: In Tuner mode, any station can be sto-
red as preset 3 by simply pressing and holding this button for
several seconds, after the desired station is selected.
To recall the station preset, simply press and release this but-
ton.
In CD mode, pressing this button will play a song repeatedly.
Press again to turn off this feature.
18. Preset 4/RDM Button: In Tuner mode, any station can be
stored as preset 4 by simply pressing and holding this button for
2 seconds, after the desired station is selected. To recall the sta-
tion preset, simply press and release this button. In CD mode,
press this button to randomly play song tracks. Press again to
turn off this feature.
19. Preset 5/DN Button: In Tuner mode, any station can be
stored as preset 5 by simply pressing and holding this button for
2 seconds, after the desired station is selected. To recall the sta-
tion preset, simply press and release this button. In CD mode,
this button will browse the folders on CD-R and CD-RW discs.
20. Preset 6/UP Button: In Tuner mode, any station can be sto-
red as preset 6 by simply pressing and holding this button for 2
seconds, after the desired station is selected. To recall the sta-
tion preset, simply press and release this button. In CD mode,
this button will browse the folders on CD-R and CD-RW discs.
21. Tuning Up Button
3 seconds to manually adjust station frequency up, Auto Seek is
shown on the display panel. Short press Track Up to scan/seek for
next higher station, Manual Seek is shown on the display panel. Scan
mode stops as soon as a strong station is found. In CD mode, pres-
sing this button will advance the CD up to the next track, the track
number is shown on the display panel. Simply press and hold the but-
ton to fast forward through a track(s). CD play starts when the but-
ton is released.
22. Tuning Down Button
re than 3 seconds to manually adjust station frequency down. Press
Track Down to scan/seek for next lower station. Scan mode stops
as soon as a strong station is found. In CD mode, pressing this but-
ton will advance the CD down to the previous track, the track num-
ber is shown on the display panel. Simply press and hold the button
to rewind through a track. CD play starts when the button is relea-
se.
Displaying information: When a retail music CD is inserted,
the disc will begin to play. The following information will be di-
splayed: CD track no./Playtime.
When a CD containing MP3 files is inserted, the display will
change modes as follows:
- Track no./Playtime
- Folder name
- File name
- Song name
- Artist's name
- Album name
The system can only display the first 8 letters of ID3 tags. If
the recorded information is longer than 8 letters, text will scroll
to the left once, then the 8 first letters will be displayed. If spe-
cific info has not been recorded on an MP3 disc, NO FOLD,
NO TRK, NO TLT, NO ALBM, NO ART will display.
Reading MP3 files from a disc
When a disc containing MP3 data is loaded, the unit checks all
the data on the disc. If the disc contains numerous folders with
many levels or non-MP3/WMA files, it takes a longer time to start
playback. In addition, it may take time for the unit to move to the
next MP3 file and the fast forward function may not be perfor-
med smoothly. Loading such a media may produce loud noise and
cause damage to the speakers. When selected to play, files and
folders are accessed in order in which they were written by the
CD writer. Therefore, the playing order may not be the same as
the order in which they are expected. For example, a disc with
the following folder/file hierarchy is subject to folder select, fi-
le select and play back order as illustrated
Note: Do not attempt to play a media containing a non-
MP3/WMA file with the the MP3/WMA extension or a media
containing non MP3/WMA files.
32
: Press and hold Track Up for more than
: Press and hold Track Down for mo-